Forum Replies Created
-
Posts
-
I run rear ZHP wheels all around (18×8.5 et50) with 255/35/18 Michelin Pilots Sports on my ZHP. No rubbing.
[quote=”CharlieDavis” post=2040]So, I was able to delete previous classifications. On the actual chart, I get 78 points, including 3 points for declared horsepower. When I look at my “Details” it comes up 5 points for the declared hp, and a total of 80 points. Which is correct?[/quote]
Charlie,
80 points is correct. There was a bug in my javascript that wasn’t using the “LSD equipped car” values for additional HP points. The bug has been fixed.
-Kris
[quote=”JeffC” post=1271]BTW, where’s the list showing point ranges per class? Could that be added to ‘About’?[/quote]
Ask and ye shall receive.
[quote=”RobP” post=1237]Makes sense.. probably worth adding a 1-liner message to that effect on the car list screen.[/quote]
Done, and you’re welcome!
[quote=”RobP” post=1235]Hi Kris,
Is there a way to edit your car’s info once you save it? It looks like right now you have to create a new profile and delete the original one…[/quote]
Hi Rob, that is correct – no way to edit a car. I don’t think the system is complex enough (meaning.. re-classifying can be done in a minute or two) to warrant an edit function.
-Kris
[quote=”klinquist” post=1213][quote=”dacat” post=1212]There’s a bug where if you select turbo or supercharger, then add HP, then unselect turbo/supercharger…it zeros out the HP points. Check my classification, I have a 79 point car with 9000 HP, SWEET![/quote]
heh, that sounds about right, programatically… the directions say to do one or the other :).
I’ll hide both tables by default then add buttons asking if you want to accept our values or type in a HP number, showing the table when clicked.[/quote]
I’ve made this change.
[quote=”dacat” post=1212]There’s a bug where if you select turbo or supercharger, then add HP, then unselect turbo/supercharger…it zeros out the HP points. Check my classification, I have a 79 point car with 9000 HP, SWEET![/quote]
heh, that sounds about right, programatically… the directions say to do one or the other :).
I’ll hide both tables by default then add buttons asking if you want to accept our values or type in a HP number, showing the table when clicked.
You can still square up your tires without going into AA.
Just get a set of front wheels for the rear 😆
Cliff,
We just added a “catch all” – we mention how wide we *think* your wheels are and ask you to calculate from there.
[img]http://i.imgur.com/eUg7Lke.png[/img]
We need to add the 18″ wheels as an option wheel/tire package for the 330Ci. Will add that to the to-do list.
Your car only has 4hp? 🙂
(Or did you mean 4 additional hp? That would mean about 195hp (225*.85)+4).I’d rather only have one box where you can type in hp amount, I’ll try to clarify the wording there.
Can you email me this screen shot please? It didn’t come through.
kris at linquist dot net
Also – try a different browser just for kicks.
Thanks!
